Transmitting Data; Transmitting Data To A Pc - wtw inoLab Multi 9310 IDS Operating Manual

Transmitting data

PC system require-
ments
Installation of the
USB driver
Connecting a PC
Adjusting the set-
tings for the data
transmission
90
12 Transmitting data
The meter has the following interfaces:
 USB-B interface (USB Device)
e.g. to connect a PC
Via the USB-B interface (USB Device) you can transmit data to a PC or printer
and update the meter software.

12.1 Transmitting data to a PC

Via the USB-B interface (USB Device) you can transmit data to a PC.
 Microsoft Windows
(for details, see enclosed installation CD, Driver directory)
 Installed USB driver for the meter (see CD-ROM or Internet)
 Settings for the USB/RS232 interface on the PC and meter in agreement
 Program to receive the measurement data on the PC
(e.g. MultiLab Importer, see CD-ROM or Internet)
1. Insert the supplied installation CD in the CD drive of your PC.
or
Download the USB driver from the Internet and unpack the files and
folders.
2. Start the driver installation (32 bits or 64 bits) suitable for your operat-
ing system.
Follow the Windows installation instructions as necessary.
1. Connect the inoLab
(USB Device).
The meter is listed as a virtual COM interface among the connections
in the Windows instrument manager.
2. Set the same transmission data at the meter and PC:
 Baud rate: to be selected in the range 1200 ... 19200
 Set at the PC only:
– Handshake: RTS/CTS
– Parity: none
– Data bits: 8
– Stop bits: 1
®
Multi 9310 IDS to the PC via the USB-B interface
®
inoLab Multi 9310 IDS
ba75937e10 08/2021