Switching Off; Login With A User Name - wtw inoLab Multi 9310 IDS Operating Manual

Operation
20
4.3

Switching off

1. Switch the meter off with
4.4

Login with a user name

After activation of the user administration by the administrator (software
MultiLab User, on enclosed CD-ROM), measurements with the meter are only
possible after login with a user name. The user
name is documented with the measured values and in records.
All user names entered by the administrator are listed in the User name menu.
The administrator determines for each user whether or not a
password is required for the login to the meter.
If the Password menu item is grayed out, no password is required for
the login.
1. Switch the meter on with
The Login dialog appears.
Login
User name
Password
Change password
03.04.2013
08:00
< >< >
 
2. Using
<ENTER>
.
The user name is highlighted.
< >< >
3. Using  
The login is done immediately if no password is required.
If a sensor is connected the measured value display appears.
4. If a password is required:
< >< >
 
Using
<ENTER>
.
<On/Off>
.
<On/Off>
.
Admin
####
, select the menu item, User name and confirm with
, select a user name and confirm with
, select the menu item, Password and confirm with
®
inoLab Multi 9310 IDS
<ENTER>
.
ba75937e10 08/2021