Navigation; Operating Modes; Measured Value Display; Menus And Dialogs - wtw Oxi 3310 IDS Operating Manual

Operation
18
4.4

Navigation

4.4.1 Operating modes

Operating mode
Measuring
Calibration
Storing in
memory
Transmitting
data
Setting

4.4.2 Measured value display

In the measured value display, you can
 open the menu for calibration and measurement settings with <ENTER>
(short keystroke)
 <ENTER_> open the Storage & config menu with the sensor-independent
settings by pressing <ENTER> (long keystroke, approx. 2 s).
 change the display in the selected measuring screen (e. g. pH <-> mV) by
pressing <M>.
 change the display in the measurement window by pressing <M> (e.g. D.O.
concentration ->D.O. saturation ->D.O. partial pressure ->).

4.4.3 Menus and dialogs

The menus for settings and dialogs in procedures contain further subelements.
The selection is made with the <><> keys. The current selection is dis-
played with a frame.
 Submenus
The name of the submenu is displayed at the upper edge of the frame. Sub-
menus are opened by confirming with <ENTER>. Example:
Explanation
The measurement data of the connected sensor are
shown in the measured value display
The course of a calibration with calibration information,
functions and settings is displayed
The meter stores measuring data automatically or man-
ually
The meter transmits measuring data and calibration
records to a USB-B interface automatically or manually.
The system menu or a sensor menu with submenus,
settings and functions is displayed
Oxi 3310 IDS (Oxi 3315)
ba75944e02 10/2014