Automatic Sensor Recognition - wtw inoLab Multi 9310 IDS Operating Manual

Overview
10
The measuring electronics with the stored adapter data are in the
adapter head. The adapter data correspond to the sensor data.
Information on available IDS adapters is given on the Internet.
Detailed information on the IDS adapter is given in the operating
manual
of the adapter.

1.3.4 Automatic sensor recognition

The automatic sensor recognition for IDS sensors allows
 to operate an IDS sensor with different meters without recalibrating
 to assign measurement data to an IDS sensor
– Measurement datasets are always stored and output with the sensor
name and sensor serial number.
 to assign calibration data to an IDS sensor
– Calibration data and calibration history are always stored and output with
the sensor name and sensor series number.
 to hide menus automatically that do not concern this sensor
To be able to use the automatic sensor recognition, a meter that supports the
automatic sensor recognition (e.g. inoLab
sensor are required.
In digital IDS sensors, sensor data are stored that clearly identify the sensor.
The sensor data are automatically taken over by the meter.
®
inoLab Multi 9310 IDS
®
Multi 9310 IDS) and a digital IDS
ba75937e10 08/2021