pH 3310 IDS
ba77035e01
02/2014
4.4
Navigation
4.4.1 Operating modes
Operating mode
Measuring
Calibration
Storing in
memory
Transmitting
data
Setting
4.4.2 Measured value display
In the measured value display, you can
open the menu for calibration and measurement settings with <ENTER>
(short keystroke)
<ENTER_> open the Storage & config menu with the sensor-independent
settings by pressing <ENTER> (long keystroke, approx. 2 s).
change the display in the selected measuring screen (e. g. pH <-> mV) by
pressing <M>.
4.4.3 Menus and dialogs
The menus for settings and dialogs in procedures contain further subelements.
The selection is made with the <><> keys. The current selection is dis-
played with a frame.
Submenus
The name of the submenu is displayed at the upper edge of the frame. Sub-
menus are opened by confirming with <ENTER>. Example:
System
General
Interface
Clock function
Service information
Reset
01.02.2014
Back
Explanation
The measurement data of the connected sensor are
shown in the measured value display
The course of a calibration with calibration information,
functions and settings is displayed
The meter stores measuring data automatically or man-
ually
The meter transmits measuring data and calibration
records to a USB-B interface automatically or manually.
The system menu or a sensor menu with submenus,
settings and functions is displayed
08:00
Operation
17