Calibration Data - wtw inoLab Multi 9310 IDS Operating Manual

Dissolved oxygen
52
O
2
7.92
0.973
Compare
03.04.2013
08:00
< > < >
6. Using
value to the nominal value (value of the comparison measurement).
Subsequently, accept the correction multiplier with
The meter switches to the measured value display.
The status display [Factor] is active.

7.3.5 Calibration data

The calibration record is automatically transmitted to the interface
after calibrating.
The calibration record of the last calibration is available in the menu Calibration
/ Calibration record. To open it in the measured value display, press the
<CAL__>
key.
The calibration records of the last 10 calibrations are available in the menu Cali-
bration / Calibration data storage / Display. To open the Calibration menu in the
measured value display, press the
DO Adjust
mg/l
, set the correction multiplier to adjust the displayed
<ENTER>
®
inoLab Multi 9310 IDS
<ENTER>
key.
ba75937e10
.
08/2021