Navigation; Operating Modes - wtw inoLab Multi 9310 IDS Operating Manual

®
inoLab Multi 9310 IDS
Changing the pass-
word
Forgotten the pass-
word?
ba75937e10 08/2021
The user specifies the password when he or she first logs in with a
user name.
A valid password consists of 4 digits.
The user can change the password with the next login.
5. Change the digit of the highlighted position with
Go to the next digit of the password with
When the password was completely entered, confirm with
The login takes place. If a sensor is connected the measured value dis-
play appears.
If the administrator has set up the access with password protection:
1. Switch the meter on with
The Login dialog appears.
< >< >
 
2. Using
<ENTER>
.
The user name is highlighted.
< >< >
3. Using  
< >< >
 
4. Using
<ENTER>
with .
5. In the Password field, enter the old password with
[] and confirm it with
6. In the New password field, enter the new password with
<F2>
/[] and confirm it with
The password is changed.
The login takes place. If a sensor is connected the measured value dis-
play appears.
Contact the administrator.
4.5

Navigation

4.5.1 Operating modes

Operating Explanation
mode
Measuring The measurement data of the connected sensor are shown
in the measured value display
Calibration The course of a calibration with calibration information, func-
tions and settings is displayed
<On/Off>
.
, select the menu item, User name and confirm with
, select a user name and confirm with
, select the menu item, Change password and confirm
<ENTER>
.
<ENTER>
< >< >
  .
<F2>
/[].
<ENTER>
<ENTER>
< >< >
 
and
< ><

.
Operation
.
.
<F2>
/
>

and
21