Maintenance, Cleaning, Disposal; Maintenance; General Maintenance Activities; Replacing The Batteries - wtw inoLab Multi 9310 IDS Operating Manual

Maintenance, cleaning, disposal

96
14 Maintenance, cleaning, disposal

14.1 Maintenance

14.1.1 General maintenance activities

The only maintenance activity required is replacing the batteries.
See the relevant operating manuals of the IDS sensors for instruc-
tions on maintenance.

14.1.2 Replacing the batteries

You can operate the meter either with normal batteries or with
rechargeable batteries (Ni-MH). In order to charge the batteries, an
external charging device is required.
1. Open the battery compartment (1) on the underside of the
meter.
1
1 Battery compartment
CAUTION
Make sure that the poles of the batteries are positioned cor-
rectly.
±
The signs on the batteries must correspond to the
the battery compartment.
2. Place four batteries (type Mignon AA) in the battery compart-
ment.
3. Close the battery compartment (1).
®
inoLab Multi 9310 IDS
±
signs in
ba75937e10 08/2021