Socket Field; Sensor Info - wtw inoLab Multi 9310 IDS Operating Manual

Operation
18

4.1.4 Socket field

1 IDS sensors: (pH, ORP, conductivity, D.O.)
2 USB B (device) interface
3 Power pack
4 Service interface
CAUTION
Only connect sensors to the meter that cannot return any volt-
ages or currents that are not allowed (> SELV and > current
circuit with current limiting).
WTW IDS sensors and IDS adapters meet these requirements.

4.1.5 Sensor info

You can display the current sensor data and sensor settings of a connected
sensor at any time. The sensor data are available in the measured value
<F1>
display with the
0
pH
7.007
01.02.2014
i
08:00
1. In the measured value display:
Display the sensor data (sensor name, series number) with [
1
/[Info] softkey.
14
25.0
°C
USB output
®
inoLab Multi 9310 IDS
4
2 3
<F1>
ba75937e10
Info].
08/2021