Measured Value And Status Display - wtw DIQ/S 182-XT-4 Operating Manual

Operation
Example:
Display options
with four connected
sensors
4 - 2
4.2

Measured value and status display

m
The key switches to the last selected measured value and status
display from any operating situation. Entries that are not completed are
ignored while doing so.
m
Pressing once again cyclically switches between further display
options.
w
Operating notes
 If more sensors are connected than can be shown in the respective
display option, the display changes its contents accordingly in
3-second intervals.
 Select a sensor in the double display with
is displayed in reverse video. The number and name of the selected
sensor are displayed in the header. In the single display, the sensor
System 182-XT-4
Double display of measured
values, large:
Main measured parameter only.
Double display of measured
values, detail:
Main and secondary measured
parameter.
Single display, measured value.
Display of the outputs.
The current states of the relays
and current outputs and the date
and time are displayed.
The information is spread over
w
two pages. Press
between the outputs of the front
and rear terminal strip (DIQ/CR3).
w
. The selected sensor
ba75753e06
to swap
12/2014