Cleaning Cartridge Slots; Front Panel Leds; Operator Panel; Operator Control Panel - IBM System Storage TS3400 Tape Library Maintenance Information

Machine type 3577
Hide thumbs Also See for System Storage TS3400 Tape Library:
Table of Contents

Advertisement

The I/O Station (
interrupting normal library operation. The three slots at the front of the lower
magazine can be configured as I/O Station slots. The I/O slots are shared by all
logical libraries.

Cleaning Cartridge Slots

Cleaning cartridges are used to clean the tape drive heads. Up to two slots in the
upper magazine can be configured as cleaning slots. The cleaning cartridge slots are
used for both manual and automatic cleaning, and are shared by all logical libraries.
When the library has two cleaning cartridges, the cartridge with the higher cleaning
count usage is selected for the automatic cleaning function.

Front Panel LEDs

Three LEDs are located to the left of the LCD display on the Operator Panel on the
front of the library. These indicate the status of the library.
• Power ON (Green LED) - The Power ON LED (
• Alarm (Yellow LED) - The Alarm LED (
• Error (Orange LED) - The Error LED (

Operator Panel

1
2
3
Figure 2-5. Operator Control Panel
The Operator Panel features a monochrome LCD graphic display (
located on the front of the library. Library operations and service functions are
performed from this screen.
The Web User Interface offers most of the same functionality as the Operator Panel
using a web browser for remote access to the library. For more information on using
the Operator Panel and the Web User Interface for library management functions,
refer to the IBM System Storage TS3400 Tape Library Planning and Operator Guide.
2-4
TS3400 Tape Library Maintenance Information
in Figure 2-4) is used to import and export cartridges without
1
library is powered ON and able to function.
is bad, degraded, or invalid, and indicates that operator intervention is required. It
is cleared when all invalid cartridges have been exported from the library. It also is
lit when a redundant power supply unit is powered OFF or loses power, when the
Autoclean function is enabled and no cleaning cartridge is in the cleaning slot, or
when the drive requests to be cleaned and no cleaning cartridge resides in the
library.
unrecoverable library or drive failure. A message is also displayed at the same time
on the Operator Panel. It is cleared when the error state is resolved.
1
in Figure 2-5) is lit when a piece of media
2
in Figure 2-5) is lit when there is an
3
5
in Figure 2-5) is lit when the
4
in Figure 2-5)
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

L5u

Table of Contents