IBM System Storage TS3400 Tape Library Maintenance Information page 24

Table 1-1. Library error codes (continued)
Code (H) Description
A timeout error occurred
while waiting for a
0050
response from bar code
reader.
The bar code reader is not
0051
connected.
Invalid data was sent to
0052
bar code reader.
Invalid data was received
0053
from bar code reader.
The bar code reader is
0054
busy.
Changed settings in initial
setting of bar code reader,
0055
but the changed number is
not reflected.
Accessor EEPROM write
0060
error detected.
Accessor EEPROM I2C
0061 communication error
detected.
Accessor EEPROM I2C
communication
0062
abnormally terminated
detected.
Accessor EEPROM
0063
checksum error detected.
Calibration failed because
0070 the Accessor contains a
cartridge.
Calibration failed due to
0071
an empty magazine.
Calibration measurement
0072
error.
GET (eject) /
CTRG.CHECK (check) /
BARCODE READ
0074
operation failed because
the Accessor contains a
cartridge.
Store (PUT) operation
failed because the
0075
Accessor contains a
cartridge.
1-8
TS3400 Tape Library Maintenance Information
Panel
Indication
1. Cycle the power and try again.
2. Replace the Library Control Blade (page 9-8).
CHK 0050
3. Replace the Accessor assembly (page 9-23).
4. Replace the Accessor Flat Cable Plate assembly (page 9-28).
5. Replace the Back Board assembly (page 9-37).
CHK 0051
6. Replace the TS3400 Tape Library chassis (page 9-44).
CHK 0052
CHK 0053
CHK 0054
CHK 0055
CHK 0060
CHK 0061
CHK 0062
CHK 0063
Cycle the power and try again.
CHK 0070
CHK 0071
CHK 0072
1. Check for presence of media in the picker.
2. Remove media from the picker.
3. Cycle the power and try again.
CHK 0074
4. Replace the Library Control Blade (page 9-8).
5. Replace the Accessor assembly (page 9-23).
6. Replace the Accessor Flat Cable Plate assembly (page 9-28).
7. Replace the Back Board assembly (page 9-37).
CHK 0075
8. Replace the TS3400 Tape Library chassis (page 9-44).
Action Required