IBM System Storage TS3400 Tape Library Maintenance Information page 32

Table 1-2. Drive error codes (continued)
Code (H) Description
A timeout error occurred
0220 when ejecting cartridge
from Drive #1.
The Loop ID setting for
0221
Drive #1 failed.
Drive #1 is in Prevent
Medium Removal state,
0222
disabling cartridge
removal.
Invalid data was sent to
Drive #2.
0300
NAK was detected.
A timeout error occurred
0301 while waiting for response
from Drive #2.
0303 Drive #2 is disconnected.
0305 Drive #2 is busy.
Drive #2 failed to execute
0306 a command because it is
not mounted.
A timeout error occurred
0320 when ejecting cartridge
from Drive #2.
1-16
TS3400 Tape Library Maintenance Information
Panel
indication
1. Confirm the drive connection.
2. Confirm the media is compatible.
3. Cycle the power and try again.
4. Replace the drive canister (page 9-11).
CHK 0220
5. Replace the Drive Docking Card (page 9-19).
6. Replace the Library Control Blade (page 9-8).
7. Replace the Back Board assembly (page 9-37).
8. Replace the TS3400 Tape Library chassis (page 9-44).
1. Confirm the drive connection.
2. Verify the drive port configuration (Web User Interface:
Configure Library → Physical).
3. Cycle the power and try again.
4. Replace the drive canister (page 9-11).
CHK 0221
5. Replace the Drive Docking Card (page 9-19).
6. Replace the Library Control Blade (page 9-8).
7. Replace the Back Board assembly (page 9-37).
8. Replace the TS3400 Tape Library chassis (page 9-44).
1. Release the Drive #1 Prevent Medium Removal state from
the host.
2. Cycle the power and try again.
3. Replace the drive canister (page 9-11).
CHK 0222
4. Replace the Drive Docking Card (page 9-19).
5. Replace the Library Control Blade (page 9-8).
6. Replace the Back Board assembly (page 9-37).
7. Replace the TS3400 Tape Library chassis (page 9-44).
1. Confirm the drive connection.
CHK 0300
2. Cycle the power and try again.
3. Replace the Library Control Blade (page 9-8).
4. Replace the drive canister (page 9-11).
CHK 0301
5. Replace the Drive Docking Card (page 9-19).
6. Replace the Back Board assembly (page 9-37).
CHK 0303
7. Replace the TS3400 Tape Library chassis (page 9-44).
CHK 0305
CHK 0306
1. Confirm the drive connection.
2. Confirm the media is compatible.
3. Cycle the power and try again.
4. Replace the drive canister (page 9-11).
CHK 0320
5. Replace the Drive Docking Card (page 9-19).
6. Replace the Library Control Blade (page 9-8).
7. Replace the Back Board assembly (page 9-37).
8. Replace the TS3400 Tape Library chassis (page 9-44).
Action Required