Removal Procedure; Drive Canister Cradle Screws - IBM System Storage TS3400 Tape Library Maintenance Information

Removal Procedure

1. Remove the drive canister from the library. See "Replacing a Tape Drive Canister
Figure 9-51. Drive canister cradle screws
2. Remove the drive from the canister housing by performing the following steps:
9-46
TS3400 Tape Library Maintenance Information
or FC 1663 Tape Drive Removal" on page 9-11.
2
a. Remove four screws (
blower.
b. Remove the four drive mounting screws (
c. Unplug the power cable, the flex cable, and the fibre pigtail cables. If
necessary, slide the drive forward to provide access to the cables.
d. Remove the drive from the canister housing.
1
in Figure 9-51) to remove the canister top cover and
1
in Figure 9-51).
2
2
1