Adding A Drive Canister Shipped With Library - IBM System Storage TS3400 Tape Library Maintenance Information

Adding a Drive Canister Shipped with Library

To install a 3592 drive canister that was shipped with this library, complete the
following steps:
1. Remove all drive cover plates (
Figure 6-20. Drive cover plate
2. Carefully slide the drive canister into the fixed tray assembly.
3. Hold the locking lever (
Figure 6-21. Front and rear view of tape drive
6-18
TS3400 Tape Library Maintenance Information
library. Store the cover plate and retaining screw for future use.
F C
S H
O R
4 G T -W
P O b / A V
R T S E E
0 P C
O R
T 1
E 0
5
E n
c
1
the lever clear the frame.
1
in Figure 6-20) from the rear panel of the
1
in Figure 6-21) up to ensure the tabs on both sides of
3
4
3
2