Tapeutil - IBM System Storage TS3400 Tape Library Maintenance Information

IBM Tape Device Selection Menu.
Select One of the devices listed below.
NAME
rmt2
rmt3
F3=Cancel
10. Enter the Filename in the destination field. (Example: /dev/rfd0 +/). You must
press F7=Commit to write the file to the diskette.
Prompting for Srce File for Operation on rmt3 located at 00-05-01-30
Please enter the following fields...
Enter Filename:
F1=Help
F5=Reset
11. Press F10 to exit the read dump.
12. Press q to quit tapeutil.
13. Remove the diskette from the diskette drive. The dump diskette created above is
in AIX/UNIX format.
Offloading Dumps to Linux System using TAPEUTIL
The dump icon appears when the dump is available, and remains on the screen to
indicate that trace data is stored in the device.
Note: Trace data is volatile and is lost if you press the Reset pushbutton or power
OFF the device.
1. At the drive service panel, verify that the drive is Online.
2. Verify that the drive is unloaded.
3. Verify that the drive is not in use by another host.
4. Start the tape utility program by typing IBMtapeutil at the prompt.
LOCATION TYPE
00-05-01-10 IBM 3592 Tape Drive and Medium Changer
00-05-01-30 IBM 3592 Tape Drive and Medium Changer
F7=Commit
F2=Refresh
F7=Commit
F10=Exit
/dev/rfd0 +/
F3=Cancel
F10=Exit
Chapter 8. Drive Maintenance Procedures
900000
B00000
F4=List
8-3