Library Control Blade Ethernet Port - IBM System Storage TS3400 Tape Library Maintenance Information

Figure 7-8. Library Control Blade Ethernet port
To connect your laptop to the service port:
1. If necessary, close down your laptop's firewall and wireless network connection.
2. Connect the laptop to the Ethernet network. If connecting directly to the Ethernet
3. On the Operator Panel, obtain the IP address of the library.
4. On the laptop, open Internet Explorer (or compatible browser).
5. In the browser address field, enter your library's IP Address URL to launch the
7-8
TS3400 Tape Library Maintenance Information
port, install an Ethernet crossover cable between the laptop and the Ethernet port
( in Figure 7-8) on the LCB.
1
a. From the top menu of the Operator Panel, press the Down button to select
View Settings, and press Enter.
b. Press the Down button until the IP Address setting is displayed and make a
note of the IP address.
c. Press the Cancel button twice to log out of the Operator Panel.
Web User Interface applet in the browser window. For example, the default is:
http://192.168.1.1
When the applet launches, the following warning message appears. This
message is normal and does not indicate a problem.
1