Replacement Procedure - IBM System Storage TS3400 Tape Library Maintenance Information

6. Remove the four screws securing the drive docking card (
1
Figure 9-21. Drive docking card

Replacement Procedure

1. Remove the packaging from the replacement drive docking card.
2. To replace the drive docking card, perform the steps to remove the drive docking
3. Run the Library Verify test in the Service Mode menu. See "Running Library
4. If requested, take the library online. See "Taking the Library Offline/Online" on
5. Package the failed drive docking card in the same packaging that the new drive
6. Go to "End of Call" on page 7-26.
9-22
TS3400 Tape Library Maintenance Information
library frame, and remove the drive docking card.
card in reverse order.
Verify Diagnostics" on page 7-5.
page 7-23.
docking card was shipped to you in, and return to IBM.
2
in Figure 9-21) to the
2