IBM System Storage TS3400 Tape Library Maintenance Information page 158

5. Select 1 (Tape).
6. Enter 1 (Open a Device).
7. Enter /dev/IBMtape0 when prompted for the device name.
8. Enter 1 (Read/Write) (not shown).
8-4
TS3400 Tape Library Maintenance Information
IBMtapeutil for Linux
==============================
1. Tape
2. Changer
3. Quit
==============================
Enter your choice:
Hit <enter> to continue...
-------------------- General Commands: ----------------------------
1. Open a Device
2. Close a Device
3. Inquiry
4. Test Unit Ready
5. Reserve Device
6. Release Device
Q. Quit IBMtapeutil
------------------- Medium Changer Commands: ----------------------
60. Element Information
61. Position To Element
62. Element Inventory
63. Exchange Medium
64. Move Medium
-------------------- Service Aid Commands: ------------------------
70. Dump Device
71. Force Dump
-------------------------------------------------------------------
99. Back To Main Menu
Enter Selection:
7. Request Sense
8. Log Sense Page
9. Mode Sense Page
10. Switch Tape/Changer Device
11. Create Special Files
12. Query Driver Version
65. Load/Unload Medium
66. Initialize Element Status
67. Prevent/Allow Medium Removal
68. Initialize Element Status Range
69. Read Device Identifiers
72. Load Ucode
73. Reset Drive