IBM System Storage TS3400 Tape Library Maintenance Information page 26

Table 1-1. Library error codes (continued)
Code (H) Description
X calibration error #1.
During X calibration,
0088
CTRG. sensor OFF could
not be detected.
X calibration error #2.
During X calibration,
0089
CTRG. sensor ON could
not be detected.
X calibration error #3.
During X (DRIVE)
008A
calibration, CTRG. sensor
OFF could not be
detected.
X calibration error #4.
During X (DRIVE)
008B
calibration, CTRG. sensor
ON could not be detected.
During X operation, a
008F cartridge magazine was
removed.
Y movement error #1.
During Y movement, an
0090
error occurred in the
target stop position's
origin sensor detection.
Y movement error #2.
During Y movement, the
0091
motor lost sync with
commanded position.
Y movement error #3.
During initialization, the
0092
motor lost sync with
commanded position.
During initialization, the
0094 Y origin position could
not be detected.
Y calibration error #1.
During Y calibration,
0098
CTRG. sensor OFF could
not be detected.
Y calibration error #2.
During Y calibration,
0099
CTRG. sensor ON could
not be detected.
1-10
TS3400 Tape Library Maintenance Information
Panel
Indication
Cycle the power and try again.
CHK 0088
CHK 0089
CHK 008A
CHK 008B
1. Confirm the magazine is closed.
2. Cycle the power and try again.
CHK 008F 3. Replace the Library Control Blade (page 9-8).
4. Replace the Back Board assembly (page 9-37).
5. Replace the TS3400 Tape Library chassis (page 9-44).
1. Cycle the power and try again.
2. Replace the Library Control Blade (page 9-8).
CHK 0090
3. Replace the Accessor assembly (page 9-23).
4. Replace the Accessor Flat Cable Plate assembly (page 9-28).
5. Replace the Back Board assembly (page 9-37).
6. Replace the TS3400 Tape Library chassis (page 9-44).
CHK 0091
1. Cycle the power and try again.
2. Replace the Library Control Blade (page 9-8).
CHK 0092
3. Replace the Accessor assembly (page 9-23).
4. Replace the Accessor Flat Cable Plate assembly (page 9-28).
5. Replace the Back Board assembly (page 9-37).
CHK 0094
6. Replace the TS3400 Tape Library chassis (page 9-44).
Cycle the power and try again.
CHK 0098
CHK 0099
Action Required