Centrex/Pbx; Co / Pbx Programming - Vodavi STARPLUS Triad-S Manual

2-50
Chapter 2 - Features and Operation

Centrex/PBX

The Triad-S
the Triad-S
provides easier access to many Centrex features by offering the following features.

CO / PBX Programming

Description
Each individual outside line connected to the system may be programmed as a CO or PBX
line. Use the PBX mark when identifying Centrex lines.
Programming Steps
1. Press FLASH and dial [40]. The following message displays:
2. Enter a valid number for the range of lines being programmed. If only one line is being
programmed, enter that number twice (001 001).
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 (Page A) is lit. The following message displays to indicate current
programming of that line or group of lines:
4. Press the CO/PBX flexible button (Button #2).
5. Enter a 0 or 1 which corresponds with the following entries:
[0] = PBX
[1] = CO
6. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT ... All lines are assigned as CO lines.
provides features that are Centrex compatible so that Centrex users can utilize
System to enhance their Centrex capabilities. The system actually simplifies and
CO L IN E AT TR I B U TE S
S E L E CT A CO L I NE R AN G E
If HOLD is pressed without entering a CO range, ALL CO lines are selected.
X X X - XX X PAG E A
E N T E R B U T TON N U M B E R
XXX-XXX = CO Line Range
PB X / CO
CO
0-1
Centrex/PBX