Attendant Custom Message - Vodavi STARPLUS Triad-S Manual

3-6
Chapter 3 - Attendant Features and Operation
Operation
To activate off-net forwarding:
1. Dial [603] on the dial pad,
-or-
Press preprogrammed CO OFF-NET FORWARD button.
2. Dial the CO group access code of the group to be forwarded:
[801-823] = CO Group 1-23
[824] = All CO Groups
3. Dial the speed bin number that contains the number where calls are to forward. A
confirmation tone sounds.
To cancel off-net forwarding:
1. Dial [603] on the dial pad,
-or-
Press preprogrammed CO OFF-NET FORWARD button.
2. Dial the CO group access code.
3. Dial [#] on the dial pad. A confirmation tone sounds.
Conditions
»
When CO lines are off-net forwarded, these lines display unique flash rates at the
Attendant station.

Attendant Custom Message

Description
The Attendant Custom Message feature allows the first programmed Attendant (system
administrator) to enter up to ten custom messages for system-wide use by station users. Up
to 24 characters may be entered as the custom message (this represent 48 digits entered).
A station user may store any of the available messages under a flexible button assigned as a
Message Access button. These messages may be specified and customized by the customer
on a system-wide basis.
Message status is stored in a battery-protected area of memory for retention in the event of a
power failure or system reset (soft or hard).
Operation
Program the ten custom messages at the first Attendant station as follows:
1. Dial the Custom Message program code [694] on the dial pad. The following message
displays:
ENT E R M S G NO
M M M D D Y Y
Attendant Custom Message
H H : M M am