Vodavi STARPLUS Triad-S Manual page 121

Database Administration
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
X XX - X X X PAG E A
E N T E R B U T TO N N U M B E R
XXX-XXX = fixed station range
4. Press the ADMIN ACCESS flexible button (Button #18). The following message displays:
5. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disable
[1] = Enable
6. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT ... This feature is disabled.
Conditions
»
A 24-button digital display telephone must be used for programming.
»
The Elite 30-Button Display Telephone cannot be used for programming.
»
The Electronic Telephone cannot be used for admin programming.
»
The Single Line Telephone cannot be used for admin programming.
»
Only one station at a time can be programmed when using a flexible station number.
»
When in Flash 51 programming, if you press HOLD without specifying a flexible number
to be programmed, you will get the station that is in port/station 100.
Flash 50 - Fixed Numbers
A D MI N ACCE S S
D I S AB LE D
Chapter 2 - Features and Operation
Flash 51 - Flexible Numbers
S X X X PAG E A
E N T E R B U T TON N U MB E R
XXX = 3- or 4-digit flexible number
0-1
2-95