Vodavi STARPLUS Triad-S Manual page 299

Voice Mail Outpulsing Table
Suggested Uses:
Build a table (0 for example) for any additional digits other than the station extension
number (e.g., Voice Mail Box number) needed for a caller to leave a message in a station's
mailbox (Leave).
Build another table (1 for example) for any additional digits needed for a mailbox holder
to retrieve a message (Retrieve). By Default:
Table 0
Table 1
Table 7
Programming Steps
1. Press FLASH and dial [66]. The following message displays:
2. The TABLE 00 flexible button (Button #1) led is lit. To change tables, press the appropriate
flexible button (Buttons 2–8) and perform the following procedures.
3. Dial one of the following, when required:
[0] = If a prefix is required
[1] = If a suffix is required
[#] = If entry is to be deleted
4. Enter up to 12 digits, including [
5. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
To clear entries in a table:
Press the pound key once [#], followed by HOLD.
Prefix = P7 (Pause+7)
Prefix = P7 (Pause+7)
Prefix = P7 (Pause+7)
Entries are not required in the Outpulsing Table. However, a table must be referenced
when setting up the Voice Mail groups for the system to send digits to the voice mail.
V OI C E P RE
M A I L Y S U F
Y = Table Index (0–7)
X = Entered Digits (0–9, #,
Suffix = None
Suffix =
✳
Suffix = 2 (Used for One-Touch Record)
X X X XX X X X X XX X E
X XX X X X X XX X X X E
, Pauses)
✳
] and [#], TRANS button = pause.
✳
Chapter 2 - Features and Operation
2-273