Vm Tone Mode Calling Option; Voice Mail Id Translation - Vodavi STARPLUS Triad-S Manual

2-260
Chapter 2 - Features and Operation

VM Tone Mode Calling Option

Description
Voice Mails Systems and/or Automated Attendants can utilize the Calling Station Tone Mode
option. This is useful when using supervised transfer or call screening options on voice mail
or Auto Attendant(s) requiring ring back tone for proper call handling.
The VM Tone Mode Calling feature lets the Voice Mail system override a called station's H or P
intercom settings.
Operation
The VM system must be programmed when placing a call to a station and Tone Ringing is
desired.
1. Dial [6#] on the dial pad.
2. Dial the station extension (call tone rings station).

Voice Mail ID Translation

Description
The Voice Mail ID Translation feature enables programming of the station number sent to the
Voice Mail via In-Band integration. By default, the station number is sent to the Voice Mail
system. In station programming, there is a field to insert a 4-digit entry (0000-9999) which can
be sent to the Voice Mail system in place of the station number. (FLASH 67, Button #4 enables
the VMID digit length.)
Use Flash 50 programming when you want to modify a range of stations' attributes using
fixed station numbers.
Use Flash 51 programming to modify a single station's attributes using a flexible station
number.
Programming Steps
1. Press FLASH and dial [50] or dial [51]. Flexible button #24 (New Range) is lit and one of
the following messages displays:
S TAT IO N AT T R IB UT E S
S E L E CT A S TATI O N R A N G E
2. Enter the range of fixed station numbers (100-131) to be programmed. If only one station
is being programmed, enter that number twice, e.g., [100 100].
-or-
Enter a valid flexible number (100-8999) to be programmed.
Flash 50 - Fixed Numbers
If HOLD is pressed without entering a station range, ALL stations are selected.
Flash 51 - Flexible Numbers
E N T E R S TAT IO N N U M B E R
Voice Mail