Vodavi STARPLUS Triad-S Manual page 45

Call Back
Programming Steps
1. Press the CALL BACK BTN flexible button (FLASH 07, Button #16). The following
message displays:
2. Enter a valid number (00-28) on the dial pad to correspond to one of the 29 available
options. (Refer to
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... Call Back Button flash rate is set for a Red 120 ipm Flash (10).
Operation
If you dial a telephone that is busy and want to activate Call Back:
1. Press the CALL BACK button.
2. Hang up.
When the busy station hangs up, you are signaled.
3. Answer the call; station you called is then signaled. (If your station is busy when signaled,
an automatic MSG is left at your phone).
SINGLE LINE TELEPHONE
If you dial a telephone that is busy and want to leave a Call Back indication:
1. Briefly depress and release the hookswitch.
2. Dial [622] and replace the handset.
C A LL B ACK BT N
R E D 1 2 0 IP M F L AS H
Table 2-11 on page
A Call Back Request is automatically invoked anytime a user listens to the
intercom busy tone for a preset period of time.
Only one Call Back request can be left at a station; the second request is converted
to a message wait call back request.
Only one Call Back request can be left at a station; the second request will convert
to a message waiting request.
00-28
2-130.)
Chapter 2 - Features and Operation
2-19