Vodavi STARPLUS Triad-S Manual page 197

Music-On-Hold
Programming Steps
1. Press FLASH and dial [40]. The following message displays:
2. Enter a valid number for the range of lines being programmed. If only one line is being
programmed, enter that number twice (001 001).
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible Button #19 (Page A) is lit.
4. Press the Page B flexible button (Button #20). The following message displays:
5. Press the MUSIC-ON-HOLD flexible button (FLASH 40, Page B, Button #5). The following
message displays:
6. Enter a valid number on the dial pad to change this feature.
[0] = No Music-On-Hold
[1] = Channel 1
: : : : :
[8] = Channel 8
7. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... Channel 1 is used for Music-On-Hold.
CO LI NE AT T R IB U T E S
S E LE C T A CO LI N E R A NG E
If HOLD is pressed without entering a CO range, ALL CO lines are selected.
X X X - X XX PAG E B
E N T E R B U T TON N U MB E R
XXX-XXX = CO Line Range
M O H C H A NNE L
1
Table 2-14: MOH Programming Codes
Program Flexible
Code Button
FLASH 09 1
2
3
4
5
6
* Music Channels 3-8 can only be used for Music-On-Hold functions
Feature
(after initialization)
Music Channel #3*
Music Channel #4*
Music Channel #5*
Music Channel #6*
Music Channel #7*
Music Channel #8*
Chapter 2 - Features and Operation
0-8
Default
##
##
##
##
##
##
2-171