Universal Day Answer (Uda) - Vodavi STARPLUS Triad-S Manual

2-252
Chapter 2 - Features and Operation

Universal Day Answer (UDA)

Description
UDA-assigned CO lines can signal over external page port(s). External Day ringing is
programmed on a system-wide basis in administrative programming. Stations that do not
have access to a line during the day can answer that line while the System is in the day mode
by dialing a UDA code [#5]. To use this feature, a LOOP button or an appearance of the trunk
must be present on the station.
Programming Steps
1. Press FLASH and dial [40]. The following message displays:
2. Enter a valid number for the range of lines being programmed. If only one line is being
programmed, enter that number twice (001 001).
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible Button #19 (Page A) is lit.
4. Press the Page B flexible button (Button #20). The following message displays:
5. Press the UNIVERSAL DAY ANSWER flexible button (FLASH 40, Page B, Button #4). The
following message displays:
6. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
7. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... Universal Day Answer feature is disabled.
Conditions
»
During the Day mode, all common CO lines ring when programmed for UDA ringing.
»
CO lines not programmed for UDA ringing do not participate in common audible ringing.
CO LI NE AT T R IB U T E S
S E LE C T A CO LI N E R A NG E
If HOLD is pressed without entering a CO range, ALL CO lines are selected.
X X X - X XX PAG E B
E N T E R B U T TON N U MB E R
XXX-XXX = CO Line Range
U N IV E R S A L DAY A NS WE R
D I S A B LE D
Universal Day/Night Answer
0-1