Initialize Verified Account Code Table; Verified Account Code Table Defaults; Class Of Service - Vodavi STARPLUS Triad-S Manual

2-12
Chapter 2 - Features and Operation
SINGLE LINE TELEPHONE
To enter an Account Code before a call:
1. Lift the handset.
2. Dial [627].
3. Dial the account code.
4. Dial [9] or CO Access code. Dial tone sounds.
5. Dial the desired number.
Conditions
»
Verified Account Codes allow use of an account code as a traveling Class of Service.
»
If LCR is activated in the system and verified account codes are activated, the user must
enter the account code before dialing the LCR code.
»
When verified account codes are activated, station MUST enter an account code to dial a
number that is restricted through station COS and toll restriction. An account code is not
required for calls that are unrestricted through station COS and toll restriction.
»
When verified account codes are not forced, a station user may place a call without
entering an account code. In this case, the station user's COS is based on their station
COS. In this case, a user can enter a verified account code to upgrade their COS.
»
The Redial feature does not support Verified Account Codes.
»
Keyset users must preprogram an ACCOUNT CODE flexible button.

Initialize Verified Account Code Table

Description
The Verified Account Code Table may be initialized to set all data fields to default values.
Program
Code
FLASH 31
If the Account Code contains fewer than 12 digits, dial [
dial tone.
Table 2-1: Verified Account Code Table Defaults
Flexible
Button
1 Account Code
2

Class of Service

3 Delete Code
4 Erase Digits
Features
VERIFIED ACCOUNT CODES
Account Code
] to return to the intercom
✳
Default Value
(after initialization)
None
None
N/A
N/A