Vodavi STARPLUS Triad-S Manual page 143

Hide thumbs Also See for STARPLUS Triad-S:

Table of Contents

Distinctive Ringing

The ringing choices are as follows:

Tone Duration = 50 ms/50 ms

Station users may listen to all tones by dialing the 2-digit codes one after another. The

tone that is sounding when the SPEED button is pressed is saved as that station's tone

ringing selection.

A station's tone ringing selection is maintained in a battery protected area of memory.

Therefore, if a system experiences a power failure or a soft or hard restart, the tone

ringing selection is restored.

The tone selected provides TONE ringing normal or muted to the station whenever the

station is commanded to tone ring (i.e., this excludes Camp On tone programming

confirmation tones or other specific tones not considered TONE ringing).

The selected tone is used to notify the station in the following cases:

- Incoming CO Call

- Incoming Intercom Call

- Transferred CO Line

- Recalling CO Line

- Call Back Notification

- Message Wait Call Back

- All Types of Forwarded Calls

- Executive/Secretary calls

- Line Queue Call Back

- LCR Queue Call Back

Distinctive ringing (per CO Line) supersedes station ring tone.

Table 2-9: Ringing Tones

Chapter 2 - Features and Operation