Message Waiting Indication - Vodavi STARPLUS Triad-S Manual

Voice Mail
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
X XX - X X X PAG E A
E N T E R B U T TO N N U M B E R
XXX-XXX = fixed station range
4. Press button #20. The display updates to reflect current programming for Page B.
X XX - X X X PAG E B
E N T E R B U T TO N N U M B E R
XXX-XXX = fixed station range
5. Press the VOICEMAIL ID flexible button (Button #13). The following message displays:
6. Enter a VM ID number which corresponds to 0000 to 9999.
7. Press HOLD to update the table. A confirmation tone sounds and the display updates.
DEFAULT... Station Numbers are assigned as VMID Digits.
Conditions
»
Only one station at a time can be programmed when using a flexible station number.
»
When in Flash 51 programming, if you press HOLD without specifying a flexible number
to be programmed, you will get the station that is in port/station 100.

Message Waiting Indication

Description
When Voice Mail receives a voice message for a user who has a station on the
the VM connected to the system can leave a message indication at the VM user's station.
When the station retrieves their mail, the VM system can cancel the message waiting
indication left at a station via a VM port.
The message waiting indication displays on the programmed Voice Mail (group) button. If
such a button was not programmed, a voice mail message waiting indication displays on the
MSG WAIT button as a normal message waiting signal.
Flash 50 - Fixed Numbers
Flash 50 - Fixed Numbers
V OI C E M AI L ID
0 1 0 0
Chapter 2 - Features and Operation
Flash 51 - Flexible Numbers
S X X X PAG E A
E N T E R B U T TON N U MB E R
XXX = 3- or 4-digit flexible number
Flash 51 - Flexible Numbers
S X X X PAG E B
E N T E R B U T TON N U MB E R
XXX = 3- or 4-digit flexible number
00 00 -9 99 9
2-261
Triad-S System,