Vodavi STARPLUS Triad-S Manual page 182

2-156
Chapter 2 - Features and Operation
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
X XX - X X X PAG E A
E N T E R B U T TO N N U M B E R
XXX-XXX = fixed station range
4. Press button #20. The display updates to reflect current programming for Page B.
X XX - X X X PAG E B
E N T E R B U T TO N N U M B E R
XXX-XXX = fixed station range
5. Press the KEYSET MODE flexible button (Button #12). The following message displays:
6. Enter a valid number (0-6) to change the mode of a digital telephone:
[0] = Inactive Mode (normal mode without CTI box)
[1] = PC Phone (Discovery Desktop) Mode at 4800 baud
[2] = ATD Command Mode at 4800 baud
[3] = ATH Command Mode at 4800 baud
[4] = CKTU Mode at 4800 baud
[5] = SPI Mode at 4800 baud
[6] = TAPI Mode at 4800 baud
7. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... Keyset is set for Inactive Mode.
Operation
At an idle station:
1. Dial the Keyset Mode code [648] on the dial pad,
-or-
Press preprogrammed KEYSET MODE button, the following displays:
Flash 50 - Fixed Numbers
Flash 50 - Fixed Numbers
K E YS E T MO D E
IN ACT IV E MO D E
I NAC TI V E
M O DE =
✳
Flash 51 - Flexible Numbers
S X X X
E N T E R B U T TON N U MB E R
XXX = 3- or 4-digit flexible number
Flash 51 - Flexible Numbers
S X X X
E N T E R B U T TON N U MB E R
XXX = 3- or 4-digit flexible number
S AV E = H O LD B AU D= #
PAG E A
PAG E B
0-6
2400
Keyset Mode