Message Wait / Vm Button Flash Rate - Vodavi STARPLUS Triad-S Manual

2-262
Chapter 2 - Features and Operation
The LCD Message Indication feature presents the number of new Voice Messages to users on
their LCD display. The new VM LCD message on the keyset takes priority over Forward, DND,
Messages, and idle displays. Ringing, Recalling, Outgoing Calls, and current call operation
displays override the VM message display for the duration of the call or operation.
Operation
If your Message Waiting button or programmed Voice Mail Group button is flashing, you may
have a voice message waiting.
To enter the voice mail system to check for mail:
1. Dial the Voice Mail Group number [440-447],
-or-
Press the preprogrammed Voice Mail group button or flashing Message Wait button.
2. When prompted, enter the mailbox password.

Message Wait / VM Button Flash Rate

Description
The Message Wait/VM Button flash rate is the rate at which the Message Wait and VM
button(s) flashes when you receive a message/voice mail message. This flash rate can be
programmed to 29 different options identified in the flash rate table. This enables the
programmer to customize the key system configuration to desired flash rates.
Programming Steps
1. Press the MSG WAIT/VM BTN flexible button (FLASH 07, Button #4). The following
message displays:
2. Enter a valid number (00-28) on the dial pad to correspond to one of the 29 available
options. (Refer to
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... Message Wait/VM Button flash rate is set for a Red Steady On (01).
The fixed message button should not be used as a Voice Mail button.
M S G WA I T / V M B TN
R E D S TE A DY O N
Table 2-11 on page
0 0-28
2-130.)
Voice Mail