Voice Mail Modem Access - Vodavi STARPLUS Triad-S Manual

Voice Mail In-Band Features

Voice Mail Modem Access

Description
You can program Vodavi voice mail systems (other than MiniVoice or PathFinder) using the
telephone system modem.
Programming Steps
To enable or disable the VM port:
1. Press the VM PORT flexible button (FLASH 67, Button #6). The following message
displays:
2. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT . . . VM Port is disabled.
To indicate which port is used to connect the voice mail system and the telephone system:
1. Press the VM PORT NUMBER flexible button (FLASH 67, Button #7). The following
message displays:
2. Enter a valid number (2) to indicate the port to be used.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT . . . VM Port Number is Port 2.
Operation
To access the voice mail system, you can either:
Dial [498]
-or-
Ring directly to 498
-or-
Be transferred to 498
Conditions
»
The use of this feature requires the use of a straight-thru modem cable connected from
the voice mail system to Port 2 on the
V M PO R T
D I S A B LE D
V M PO R T NU M B E R :
2
Chapter 2 - Features and Operation
0-1
2-2
Triad-S system.
2-269