6-Digit Office Code Table - Vodavi STARPLUS Triad-S Manual

Programming LCR Tables

6-Digit Office Code Table

Description
The 6-Digit Office Code Table determines a route for one or a group of individual office codes
within an area code. Certain office codes within an area code can be given unique or special
routing. If the office code dialed is not found in the 6-digit Office Code Table, the call is then
routed according to the route list table as was entered in the 3-digit table.
The system allows twenty 6-digit Area/Office code tables that may be used to route specific
office codes within an area code. Each table routes calls for a common area code to a
specified route. All entries made to a table route those office codes to the specified route list
table. An area code may be entered into more than one 6-digit table with different routes
specified.
Programming Steps
1. Press the 6-DIGIT TABLE flexible button (FLASH 75, Button #2). The following message
displays:
2. Press the HOLD button to save the entry. A confirmation tone sounds and the display
updates.
3. Enter additional office codes to be programmed into the same Area Code/Route Table,
pressing HOLD after each office code entry.
4. Press a flexible button to program a different table.
To Delete All Entries in an Area Code/Route Table:
Enter [0 AAA RR ###].
6 D IG I T R OU T IN G TA B L E
ENTE R A A A R R
✳
= [0] to remove codes, [1] to add codes
✳
AAA = Area Code
RR = Route Number 00-15
NNN = Office Code
N NN H OL D
Chapter - Least Cost Routing
B-7