Database Programming Worksheets; Database Upload/Download Routine; Upload/Download Through Remote Administration - Vodavi STARPLUS Triad-S Manual

C-6
Chapter - Customer Database Programming

Database Programming Worksheets

Before attempting programming, it is strongly recommended that customer database
worksheets be prepared (Refer to
should become part of the permanent record of customer programming. Refer to the
following sections when preparing the worksheets.

Database Upload/Download Routine

The Database Upload/Download Routine (FLASH 86) provides a maintenance facility which
permits the user to download the database to a PC, when a software change is made or when
the system needs to be initialized and reprogrammed. The Upload/Download Routine
facilitates the programming of a database on an in-house system which is downloaded to a
PC and then uploaded to a system in the field.
After the system maintenance is completed, the file saved in the PC can then be uploaded to
the system.

Upload/Download through Remote Administration

First, connect one end of an RS-232C serial cable from the RS-232C connector on the MISB to
the desired Comm Port on the PC.
Then load a communication software package (e.g., Hyperterminal) into the PC and complete
the following steps to reconfigure the system.
All trace modes such as: SMDR (Flash 21), ICLID (Flash56), and Maintenance Event
Traces MUST be turned off before a download is performed!
Default telephone type = 24-button model
Use a straight-through DB-9 to DB-9 (female to female) cable.
(DB-9)
1
2
3
4
5
6
7
8
9
Figure C-3: KSU to PC Connection Configuration
Database Programming Worksheets
"Programming Tables" on page
Connection PC Side (DB-9)
1
2
3
4
5
6
7
8
9
C-11). These worksheets