Vodavi STARPLUS Triad-S Manual page 160

2-134
Chapter 2 - Features and Operation
4. Press button #20. The display updates to reflect current programming for Page B.
X XX - X X X PAG E B
E N T E R B U T TO N N U M B E R
XXX-XXX = fixed station range
5. Press the BUTTON ASSIGN flexible button (Button #11). The following message displays:
6. Enter a valid button number [01-24] to program, followed by the desired button function:
[0] = Flexible/user changeable
[1] = CO line
[2] = Loop button/all-purpose CO appearance
[3] = Pool for specific groups
[4] = Direct feature programmable (for DSS/BLF, use [4] + the flexible station number)
[#] = Locks button
Operation
To program a user-programmable Flexible Button:
1. Press the SPEED button twice.
2. Press the assigned button to program (it must be programmed in the database as a multi-
function button).
3. Dial the desired feature code. Refer to
To erase a user programmable Flexible Button:
1. Press the SPEED button twice.
2. Press the button to erase.
3. Press the FLASH button. Confirmation tone sounds.
4. Replace handset or press ON/OFF button.
Conditions
»
Only one station at a time can be programmed when using a flexible station number.
»
When in Flash 51 programming, if you press HOLD without specifying a flexible number
to be programmed, you will get the station that is in port/station 100.
Flash 50 - Fixed Numbers
FL E X B U T TON P R OG
E N T E R B U T TO N D ATA
Flexible Button Assignment
Flash 51 - Flexible Numbers
S X X X PAG E B
E N T E R B U T TON N U MB E R
XXX = 3- or 4-digit flexible number
"Default Numbering Plan" on page D-13.