Vodavi STARPLUS Triad-S Manual page 401

Programming LCR Tables
EXAMPLE -- If a call is placed at 5:45 pm on a Monday, then according to the Daily Start Time
Table (using default values) the entry for time period two of the weekly schedule is checked.
Because it is Monday the entry for time period two on Monday is used and the result is that the
Time Period Route List number two (again using default values) is used for all routes. Thus, the call
is routed according to the entries in Time Period Two Route List no matter what route (00–15) is
selected.
Programming Steps
1. Press the WEEKLY SCHED flexible button (FLASH 75, Button #7). The following message
displays:
2. Press the HOLD button after each complete daily entry. A confirmation tone sounds and
the display updates.
Figure B-3: Daily and Weekly Start Time Table
WE E K LY S C H E D U LE TA B LE
E NT E R D T T T
D = Day of the Week:
[0] = Monday
[1] = Tuesday
[2] = Wednesday
[3] = Thursday
[4] = Friday
[5] = Saturday
[6] = Sunday
T = Time Period Route List (1-4) to use for the time-of-day (based on the Daily Start Time
table). Enter values for all time periods specified in the Daily Start Time table for that day.
1st T = Time Period Route List for first Daily Start Time (applies to all Route List tables).
2nd T = Time Period Route List for second Daily Start Time (applies to all Route List tables).
3rd T = Time Period Route List for third Daily Start Time (applies to all Route List tables).
4th T = Time Period Route List for fourth Daily Start Time (applies to all Route List tables).
T H O LD
B-13
Chapter - Least Cost Routing