Port Assignment; Ring Delay Timer - Vodavi STARPLUS Triad-S Manual

ICLID Programming

Port Assignment

Programming Steps
1. Press the PORT flexible button (FLASH 56, Button #4) to specify which port to use for
ICLID information.
2. Enter a valid number for one of the ICLID Ports:
[1] = Port # 1 (RS-232C on optional MISB)
[2] = Port # 2 (RS-232C on optional MISB)
(LCD displays current baud rate assigned to the ICLID Port number.)
3. Press HOLD to accept the data. A confirmation tone sounds and the display updates.
DEFAULT ... Port #1.

Ring Delay Timer

Description
The Ring Delay timer was added to the
The Ring Delay timer is started whenever a CO Line detects incoming ringing. When the timer
expires, CO line ringing is detected by digital telephones and SLTs.
The purpose of this timer is to wait until after the first ring cycle to be detected by the digital
system so the ICLID information is passed down the CO line prior to being answered. In some
cases, it may be necessary to set the Ring Delay Timer to four seconds so all the ICLID
information is received from the Central Office. The Ring Delay Timer setting is variable from
00-20 seconds.
Programming Steps
1. Press FLASH and dial [40]. The following message displays:
2. Enter a valid number for the range of lines being programmed. If only one line is being
programmed, enter that number twice (001 001).
Use Port 1 or 2 for ICLID.
IC LI D NA M E B AU D P OR T
NO Y E S 9 6 0 0
CO LI N E AT TR I B U TE S
S E LE C T A CO L IN E R A NG E
If HOLD is pressed without entering a CO range, ALL CO lines are selected.
1
Triad-S to accommodate ICLID interface requirements.
A-9
Chapter - ICLID / Caller ID