Vodavi STARPLUS Triad-S Manual page 366

4-42
Chapter 4 - Call Distribution - ACD/UCD
To program a Table for a CO Line port:
1. Press the TABLE X flexible button (1-8).
2. Dial [1] for CO Port Interface.
3. Dial the desired CO line number, using a 4-digit format, e.g., for CO line 1, enter 0001.
4. Enter message duration (000-300 seconds).
5. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
To program a Table for an SLT port:
1. Press the TABLE X flexible button (1-8).
2. Dial [2] for SLT Port Interface.
3. Dial the desired SLT station number, using a 4-digit format, e.g., for SLT station number
120, enter 0120.
4. Enter message duration (000-300 seconds).
5. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
To program a Table for a RAN Hunt Group port:
1. Press the TABLE X flexible button (1-8).
2. Dial [3] for RAN Hunt Group.
3. Dial [0458-0461] for RAN Hunt Group used.
4. Enter message duration (000-300 seconds).
5. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
To program a Table for digital voice mail:
1. Press the TABLE X flexible button (1-8).
2. Dial [4] for the Digital Voice Mail function.
3. Dial the desired Voice Mail Group number, using a 4-digit format, e.g., for Voice Mail
Group 440, enter 0440.
4. Dial a three-digit menu number [000-999].
5. Dial [0-9].
0 = No DTMF Detection, No Messages Played. (Default)
1 = DTMF Detection, No Message.
2 = No DTMF, Place In Queue Message.
3 = DTMF Detection, Place In Queue Message.
4 = No DTMF, Hold Time Message.
5 = DTMF Detection, Hold Time Message.
6 = No DTMF, Both Messages.
7 = DTMF Detection, Both Messages.
8 = Not used at this time.
9 = Not used at this time.
6. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
To clear entries:
1. Press the [#] button.
2. Then press HOLD.
Uniform Call Distribution