Vodavi STARPLUS Triad-S Manual page 119

Cordless Key Telephone Unit Feature Button
2. Enter the range of fixed station numbers (100-131) to be programmed. If only one station
is being programmed, enter that number twice, e.g., [100 100].
-or-
Enter a valid flexible number (100-8999) to be programmed.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
X XX - X X X PAG E A
E N T E R B U T TO N N U M B E R
XXX-XXX = fixed station range
4. Press button #20. The display updates to reflect current programming for Page B.
X XX - X X X PAG E B
E N T E R B U T TO N N U M B E R
XXX-XXX = fixed station range
5. Press the CORDLESS KEY flexible button (Button #17) to assign the FEAT Buttons. The
following message displays:
DEFAULT ... No button (00) is assigned to the FEAT.
Conditions
»
Only one station at a time can be programmed when using a flexible station number.
»
When in Flash 51 programming, if you press HOLD without specifying a flexible number
to be programmed, you will get the station that is in port/station 100.
If HOLD is pressed without entering a station range, ALL stations are selected.
Flash 50 - Fixed Numbers
Flash 50 - Fixed Numbers
CO R DL E S S K E Y B TN
XX
XX = Assigned FEAT Button (01-24 = Button 1-24, 01-30 for Large Screen Display telephone)
00 = None
Chapter 2 - Features and Operation
Flash 51 - Flexible Numbers
S X X X PAG E A
E N T E R B U T TON N U MB E R
XXX = 3- or 4-digit flexible number
Flash 51 - Flexible Numbers
S X X X PAG E B
E N T E R B U T TON N U MB E R
XXX = 3- or 4-digit flexible number
00-30
2-93