Labconco Logic+ A2 Technical Manual page 38

6. On a Type A2 or C1 only, if field installing, or removing the Airflow Sensor,
change the selection accordingly, press [OK/MUTE].
AIRFLOW SENSOR
AIRFLOW SENSOR
7. On all biosafety cabinet types, if field installing, or removing the UV Light, change
the selection accordingly (screen shown above), press [OK/MUTE].
8. On Type A2 models only, if field installing, or removing the Canopy connection,
change the selection accordingly, press [OK/MUTE].
Note: When a Type C is selected previously, the
the software will default the selection correctly based on whether A-mode (No Canopy)
or B-mode (Canopy) was previously selected.
CANOPY
CANOPY
9. The Sash Height
the model is a C1, and the user has decided to switch between 8-inch and 10-
inch sash operation. Press [OK/MUTE].
If the biosafety cabinet is a Type A2 or B2, this is the final screen selection. If a C1,
proceed to step #10.
[OK/MUTE]
[OK/MUTE]
selection will display next, and should NOT be changed, unless
38
UV LIGHT
UV LIGHT
Canopy Screen will not appear, but
SASH HEIGHT
8 INCH