Labconco Logic+ A2 Technical Manual page 37

3. From the Warning
the following screens are restricted.
4. On the Password
[TIMER] [OK/MUTE].
PASSWORD
* * * * *
5. Configuration should be highlighted, if not, select it, press [OK/MUTE]. The first
screen will display the biosafety cabinet type. Do NOT change this selection,
press [OK/MUTE].
TYPE A2
TYPE B2
TYPE C1
This screen only shown
on Type C1 models
If changing between A-
Mode and B-Mode on a
Type C1, do so here
Type B2 models must have an
Airflow Sensor, so this screen is
not shown on a Type B2
Screen, press [OK/MUTE]
Screen, enter the password:
Password
Entered
[OK/MUTE]
37
to acknowledge the warning that
[LIGHT] [UV LIGHT] [TIMER]
CONFIGURATION
CALIBRATION
RECIRCULATE (A MODE)
EXHAUST (B MODE)
AIRFLOW SENSOR
AIRFLOW SENSOR
[OK/MUTE]