Introduction; Control Panel; Keys And Knobs - ESAB A2 PEK Instruction Manual

1 INTRODUCTION

1 INTRODUCTION
To benefit as much as possible from your welding equipment, we recommend that you read
this instruction manual.
For general information about operation, see the instruction manual for the control unit,
automatic welding machine, column and boom or power source.
The text presented in the display is available in the following languages: English, US English,
Swedish, Finnish, Norwegian, Danish, German, French, Italian, Dutch, Spanish, Portuguese,
Hungarian, Polish, Czech, Turkish, Chinese, Korean and Russian.
Instruction manuals in other languages can be downloaded from the Internet:
1.1

Control panel

1. Menu
2. Positioning knob, for moving cursor
3. Enter
4. Green indication lamp, illuminates
when the function is active
5. Welding start
6. Welding stop
7. Travel speed / Setting knob
8. Manual travel motion
9. Manual wire feed downwards
1.1.1

Keys and knobs

Menu
The Menu key always takes you back to the main menu in the relevant process.
0460 949 474
10. Arc voltage / Setting knob
11. Fast motion
12. Manual travel motion
13. Welding current / Wire feed speed /
Setting knob
14. Emergency stop
15. Manual wire feed upwards
16. Soft keys
17. Display
- 5 -
www.esab.com
© ESAB AB 2021