First Step; Choice Of Language - ESAB A2 PEK Instruction Manual

1 INTRODUCTION
Enter
Use the ENTER key to confirm a selection.
Soft keys
The five keys (S1 - S5) under the display have different functions. They are called soft keys,
i.e. they can have different functions depending on which menu you are in. The current
function for these keys can be seen from the text in the bottom row of the display. When the
function is active, this is indicated by the field with the text box turning white.
Wire feed upwards
Key for reversing the wire without arc voltage, when replacing wire bobbin for
example. The wire is fed as long as the button is depressed.
Wire feed downwards
Menu
Key for feeding wire without arc voltage. The wire is fed as long as the button is
depressed.
Travel motion
Key for travel motion in the direction of welding where the symbol is indicated on
the weld equipment. To stop travel motion press
The LED illuminates during travel motion.
Welding start
Key for welding start.
Welding stop
Key for welding stop for all travel motions and all motors.
Positioning knob
The uppermost right-hand knob is the positioning knob and is used to position the cursor.
Settings knob
The three settings knobs are used to change the set values in the panel.
1.2

First step

1.2.1

Choice of language

This menu appears at first start:
0460 949 474
,
- 6 -
or .
© ESAB AB 2021