Recall - ESAB A2 PEK Instruction Manual

8 MEMORY MANAGEMENT
WELD DATA MEMORY
5 - (SAW)
STORE
Parts of the content of weld data set number 5 are presented at the bottom of the display.
If a data set is already stored in the selected location, you will be asked if you want to
overwrite that set or not, YES or NO.
WELD DATA MEMORY
5 - (SAW)
OVERWRITE DATA SET5 IN MEMORY?
Return to the memory menu using NO.
8.3

Recall

We are going to recall a stored data set:
Mark the row using the positioning knob. Press RECALL.
WELD DATA MEMORY
5 - (SAW)
STORE RECALL
Press YES to confirm that you want to recall data set number 5.
0460 949 474
SAW: CA: FE SOLID: 3.0 mm
30.0 V: 450 A: 50 cm/min
RECALL DELETE
SAW: CA: FE SOLID: 3.0 mm
30.0 V: 450 A: 50 cm/min
SAW: CA: FE SOLID: 3.0 mm
30.0 V: 450 A: 50 cm/min
DELETE
- 34 -
2ND FUNCT
NO
2ND FUNCT QUIT
QUIT
YES
© ESAB AB 2021