Specify/Edit Lock Code; General Configuration; Fast Mode Soft Keys - ESAB A2 PEK Instruction Manual

9 CONFIGURATION MENU
If it is activated and you try to exit, the following screen appears in order to warn the user
about the lock protection.
PRESS ENTER FOR
LOCK CODE...
Here you can select QUIT to undo and return to the previous menu, or proceed by pressing
ENTER to enter the lock code.
You will then move to the menu with the keyboard, where you can enter the code. Press
ENTER after each character, and confirm the code by pressing ENTER again.
The following text box appears:
UNIT UNLOCKED!
If the code is not correct, an error message is displayed that offers the option of trying again
or returning to the original menu, i.e. the measure screen or the fast mode menu.
If the code is correct, all blocks to other menus will be removed, although the code lock
remains activated. This means that you can leave the measure screen and the fast mode
menu temporarily, yet still retain the lock status when you return to these menus.
9.1.2

Specify/edit lock code

In specify/edit lock code, you can edit an existing lock code or enter a new one. A lock code
can comprise a maximum of 16 optional letters or figures.
9.2

General configuration

MAIN MENU » CONFIGURATION » GENERAL CONFIGURATION
In this menu you can set:
• Fast mode soft keys, see section "Fast mode soft keys".
• Quality data log to file, see section "Quality data log to file".
• Setting soft keys, see section "Soft key configuration".
• Automatic weld data storage, see section "Auto save mode".
• Unit of length, see "Unit of measurements".
9.2.1

Fast mode soft keys

The soft keys WELD DATA 1 up to and including WELD DATA 4 are displayed in the fast
mode menu.
SAW: CA
WELD DATA 1 WELD DATA 2
These are configured as follows:
Position the cursor on the row for SOFT KEY NUMBER.
0460 949 474
WELD DATA 3 WELD DATA 4
- 40 -
16
2ND FUNCT
© ESAB AB 2021