Wire Feed Axis - ESAB A2 PEK Instruction Manual

9 CONFIGURATION MENU
The following options can be selected:
• A2TFJ1
A2 tractor automatic welding machine for Submerged Arc Welding (SAW)
• A2TGJ1
A2 tractor automatic welding machine for Gas-Shielded Metal Arc Welding (GMAW)
• A6TFF1
A6 tractor automatic welding machine for Submerged Arc Welding (SAW)
• MTW600
A6 tractor automatic welding machine for Submerged Arc Welding (SAW)
• FREE 2 AXIS
Optional configuration for connecting 2 motors to the actuator board. One for wire feed
and one for travel motion.
• FREE 3 AXIS
Optional configuration for connecting external roller beds, positioners or linear axis as
well as for 2 motors to the actuator board. One for wire feed and one for travel motion.
• N7500I
Welding head for Gouging.
• Motor Control
Optional configuration to use PEK control unit for separate motor control without a
power source.
9.3.2

Wire feed axis

The wire feed motor is set automatically according to the tables below.
Motor
Gear 1
Gear 2
Diameter feed rollers 49 mm
Pulse sensor
Low manual speed
High manual speed
FREE 2 AXIS
Motor VEC 4000
Gear 1 156:1
Gear 2 1:1
Diameter feed 49 mm
rollers
Pulse sensor 32 ppr
Low manual 150 cm/min
speed
High manual 300 cm/min
speed
0460 949 474
A2TFJ1 A2TGJ1
5035 38 RPM 5035 68 RPM
49:1 49:1
1:1 1:1
49 mm
28 ppr 28 ppr
150 cm/min 150 cm/min
300 cm/min 300 cm/min
FREE 3 AXIS
VEC 4000
156:1
1:1
49 mm
32 ppr
150 cm/min
300 cm/min
- 45 -
A6TFF1 MTW600
VEC 4000 FHP258
156:1 24:1
1:1 1:1
49 mm 30 mm
32 ppr 28 ppr
150 cm/min 150 cm/min
300 cm/min 300 cm/min
N7500I Motor Control
N7500i 10000 VEC 4000
576:1 156:1
1:1 1:1
40 mm 49 mm
128 ppr 32 ppr
61 cm/min 150 cm/min
150 cm/min 300 cm/min
© ESAB AB 2021