Export/Import; File Manager - ESAB A2 PEK Instruction Manual

10 TOOLS
8411, Travel speed motor error
sub-
code 1
There are no pulses from the motor pulse transducer.
1. Check the motor cables. Replace the pulse transducer.
10.2

Export/Import

MAIN MENU » TOOLS » EXPORT / IMPORT
In the Export/Import menu, it is possible to transfer information to and from the control panel
via a USB memory.
The following information can be transferred:
• WELD DATA SETS
• SYSTEM SETTING
• SETTING LIMITS
• MEASURE LIMITS
• ERROR LOG
• QUALITY FUNCTION LOG
• PRODUCTION STATISTICS
Carry out the following to save on a USB memory:
Insert the USB memory into the control unit.
Select the row with the information that is to be transferred. Press EXPORT or IMPORT,
depending on whether the information is to be exported or imported.
EXPORT/IMPORT
WELD DATA SETS
SYSTEM SETTINGS
SETTING LIMITS
MEASURE LIMITS
ERROR LOG
QUALITY FUNCTION LOG
PRODUCTION STATISTICS
EXPORT IMPORT
10.3

File manager

MAIN MENU » TOOLS » FILE MANAGER
In the file manager it is possible to manage information on a USB memory (C:\). File
manager makes it possible to delete and copy weld data and quality data manually.
When the USB memory is connected, the display shows the memory's default folder if one is
not previously selected.
The control panel remembers where you were the last time you used file manager, so that
you return to the same place in the file structure when you come back.
0460 949 474
EXPORT / IMPORT
EXPORT / IMPORT
EXPORT / IMPORT
EXPORT / IMPORT
EXPORT
EXPORT
EXPORT
- 63 -
QUIT
© ESAB AB 2021