Introduction; Overview; Control Panel A32 - ESAB Caddy A32 Instruction Manual

1 INTRODUCTION

1 INTRODUCTION
1.1

Overview

The manual describes the use of A32, A33 and A34 control panel.
For general information about operation see the Instruction manual for the power source.
When the mains power is supplied the unit runs a self diagnosis of the LEDs
and the display, the program version is displayed and in this example the
program version is 0.18.
NOTE!
Differencies in the panel function may occur, depending on in which product it is
installed.
Instruction manuals in other languages can be downloaded from the website, www.esab.com
.
1.2

Control panel A32

1. Display
4. Knob for setting the current
7. Choice of welding method MMA
9. Setting from panel
10. Display of VRD function (reduced open-circuit voltage) .
Measured value in the display for welding current A, is arithmetic average value = rectified
average value.
0460 449 274
or TIG
or connecting remote control unit
- 3 - © ESAB AB 2013